MINELAB EQUINOX 600|800 SOFTWARE UPGRADE 3.0

As these modern detectors are software application, driven any enhancement/feature addition can be seen as a benefit, and an extension of the life of the product. In the early days you had to replace your detector to get a function like, an additional frequency which cost genuine dollars.

Minelab have actually released a software upgrade for the Nox 600 and 800 series of detectors, this brings a new Single Frequency of 4 kHz including to the existing 5, 10, 15, 20 and 40 kHz options. This brand-new 4 kHz frequency boosts the detection of big deep targets, especially those discovered in parts of Asia. As an outcome of optimising for these conditions, this brand-new frequency might respond in a different way to users compared to the other single frequencies. All other single and multi-frequency settings are the same in their efficiency. In addition to the 4 kHz upgrade feature, different stability improvements have been included.

Updating the detector is a very simple process and breaks down like so:

Important: The coil must be linked to the detector prior to trying the upgrade.

Download the Minelab Update Utility from here Apple or Windows.Run the Utility on your computer.Connect the Equinox to a USB port on your computer using the provided charging cable.Turn on the detector and the and the Utility will interact with the detector to identify if an upgrade is required.If a upgrade is needed Click INSTALLIf the detector approximately date simply disconnect the detector.During the upgrade the screen will go blank and the green LED will blink rapidly. The update takes approx. 1 minute to complete.Once complete detach the detector and you are all set to go discover those deep large objects.

The initial Minelab upgrade guidelines can be found here

The full Minelab short article can be discovered here

As constantly please share this post or leave remarks and I will react to them.

Minelab have launched a software upgrade for the Nox 600 and 800 series of detectors, this brings a brand-new Single Frequency of 4 kHz including to the existing 5, 10, 15, 20 and 40 kHz options. As a result of optimising for these conditions, this new frequency might respond in a different way to users compared to the other single frequencies. In the early days you had to replace your detector to get a function like, an additional frequency which cost genuine dollars.